USB3.1™

USB-IF approved USB3.1™ Compliance test fixture. TPAs can be used for testing USB-Type-C hosts and devices.
The USB 3.1 USB (10 GT/s) Type-C Electrical Test Fixture Set provides a worst case, ISI hardware channel for PHY’s. It is intended to assist compa-nies in testing transmitter signal quality and receiver sensitivity for either hosts or peripherals.

USB3.1 測試治具 產品分類： 

640-0763-000	USB3.1-TPAC-FULLSET-K
640-0764-000	USB3.1-TPAC-SETA-K
640-0765-000	USB3.1-TPAC-SETB-K
640-0764-010	USB3.1-TPAC-CAP-DEV
640-0764-020	USB3.1-TPAC-RX-CAL
640-0764-030	USB3.1-TPAC-CLB-5.6
640-0764-040	USB3.1-TPAC-CLB-7.1
640-0764-050	USB3.1-TPAC-CLB-8.1
640-0764-060	USB3.1-TPAC-MOCK-HD-7.2
640-0764-070	USB3.1-TPAC-MOCK-HD-8.7
640-0764-080	USB3.1-TPAC-MOCK-HD-9.7
640-0764-090	USB3.1-TPAC-5G-HD-10.4
640-0764-010	USB3.1-TPAC-CAP-DEV