USB3.2-TPAC-FULLSET-K
P/N:640-0763-001
USB-IF approved USB3.2™ Compliance test fixture. TPAs can be used for testing USB-Type-C hosts and devices.
USB 3.2 USB (10 GT/s) Type-C 電氣測試夾具組為 PHY 提供了最壞的情況，即 ISI 硬體通道。它主要在説明公司測試主機或週邊設備的發射器信號品質和接收器靈敏度。
Qty 3 – USB 3.2 Compliance Load Board Type-C (5.6”, 7.1”, 8.1”)
Qty 3 – USB 3.2 Mock Host/Device Type-C (7.2”, 8.7”, 9.7”)
Qty 3 – USB 3.2 5G Host/Device Fixture 2 (10.4”, 12.4”, 14.4”)
Qty 1 – USB 3.2 Host PHY Tx Fixture Type-C
Qty 1 – USB 3.2 Dev PHY Tx Fixture Type-C
Qty 1 – USB 3.2 Host Fixture 1C
Qty 1 – USB 3.2 Dev Fixture 1C
Qty 1 – USB 3.2 Rx CAL Fixture Type-C
Qty 1 – USB 3.2 Full Type-C Breakout Plug
Qty 2 – USB 3.2 Full Type-C Breakout Receptacle
Qty 1 – USB 3.2 Captive Device Fixture Type-C
Qty 1 – meter USB Type-C to Type-C cable
Qty 1 – 2 meter USB Type-C to Type-C cable,
Qty 2 – 5 Volt DC power supply to provide V-Bus to peripherals
Qty 2 – Power Cord
Qty 3 – USB 3.2 Mock Host/Device Type-C (7.2”, 8.7”, 9.7”)
Qty 3 – USB 3.2 5G Host/Device Fixture 2 (10.4”, 12.4”, 14.4”)
Qty 1 – USB 3.2 Host PHY Tx Fixture Type-C
Qty 1 – USB 3.2 Dev PHY Tx Fixture Type-C
Qty 1 – USB 3.2 Host Fixture 1C
Qty 1 – USB 3.2 Dev Fixture 1C
Qty 1 – USB 3.2 Rx CAL Fixture Type-C
Qty 1 – USB 3.2 Full Type-C Breakout Plug
Qty 2 – USB 3.2 Full Type-C Breakout Receptacle
Qty 1 – USB 3.2 Captive Device Fixture Type-C
Qty 1 – meter USB Type-C to Type-C cable
Qty 1 – 2 meter USB Type-C to Type-C cable,
Qty 2 – 5 Volt DC power supply to provide V-Bus to peripherals
Qty 2 – Power Cord
