首頁 / 產品介紹
Wilder 針對Disployport Test Fixture-The DP-TPA-PRRC DisplayPort test adapter or test fixture kit facilitates Source and Sink compliance testing for DisplayPort devices.
DisplayPort測試適配器和測試夾具套件促進源和匯合規測試適用於DisplayPort設備。Wilder Technologies 的強化型 DisplayPort™ 與 miniDisplayPort™ 測試轉接器，可支援依據 DP2.1 規範進行主端（Host）與裝置端（Device）的測試。 這些轉接器支援更高的資料傳輸速率（UHBR10、UHBR13.5 和 UHBR20），能驅動 8K 顯示器及更高刷新率的影像輸出。 Wilder 的測試夾具為預符合（pre-compliance）與正式符合性（compliance）測試提供了穩定的平台。
Wilder Technologies Enhanced DisplayPort™ and miniDisplayPort™ test adapters enable Host and Device testing to DP2.1 Specifications. Supporting increasing data rates (UHBR10, UHBR13.5 and UHBR20) to drive 8k displays and higher refresh rates, Wilder’s fixtures provides the a platform for pre-compliance and compliance testing.
※ DisplayPort 測試治具分類：
|
miniDisplayPort DP2.1
|
The ENH-MDP-TPA-PR DisplayPort test adapters facilitates Source and Sink compliance testing for miniDisplayPort DP2.1 Specifications. |
|
|
DisplayPort DP2.1 |
The ENH-DP-TPAR20-PR DisplayPort test adapters facilitates Source and Sink compliance testing for DisplayPort DP2.1 Specifications. |
|
|
DPAC-CAM + Type C |
Our DUTC + Type C Solution enables our users to do Alt-Mode Type-C testing by selected modes and carry out electrical validation without having to change TPA configuration. |
|
|
DP USB Type-C |
The DPC-TPA-PRRCB test fixture kits facilitate DPC host and device compliance testing using our DPC Plug, Receptacle and Control Board. |
|
|
DP 1.5 |
The DP-TPA-PRRC DisplayPort test adapter or test fixture kit facilitates Source and Sink compliance testing for DisplayPort devices. |
|
|
Dual mode DisplayPort 1.5 |
The DPI-TPA-PRRCA Dual Mode DisplayPort Interoperability test adapter or test fixture kit facilitates Source and Sink compliance testing for Dual Mode DisplayPort devices. |
|
|
mDP 1.5 |
The mDP-TPA-PRRC Mini DisplayPort test adapter or test fixture kit facilitates Source and Sink compliance testing for Mini DisplayPort devices. |
|
|
Dual Mode mDP 1.5 |
The MDPI-TPA-PRRCA Dual Mode Mini DisplayPort Interoperability test adapter or test fixture kit facilitates Source and Sink compliance testing for Dual Mode Mini DisplayPort devices. |
|
|
eDP1.5a 40pin/ eDP1.5a 30pin with LED driver |
The eDP-TPA40L-PC DisplayPort test adapter or test fixture kit facilitates Source and Sink compliance testing for 40 Position Embedded DisplayPort devices with 4 DP lanes by supporting eDP1.5a specification. |
|
|
MyDP test fixture kit |
The MYDP-TPA-PRSA test adapter or test fixture kit facilitates MyDP Source and Sink compliance testing for both MyDP Hosts and Devices. |
DP-TPA-PRRC
DisplayPort Test Adapter (P/N#640-0004-000)
• 1.35 Gb/s, 2.7 Gb/s, 5.4 Gb/s, and 8.1 Gb/s data rates supported
• Insertion loss < -3 dB @ 6.5 GHz mated plug and receptacle fixtures
• Return loss < -20dB @ 4.25 GHz mated plug and receptacle fixtures
• Differential Impedance 100 +/- 5 ohms
• Single Ended Impedance 50 +/- 2.5 ohms
DPI-TPA-PRRCA
Dual Mode DisplayPort (Interop) Test Adapter (P/N#640-0223-000)
• 1.35 Gb/s, 2.7 Gb/s, 5.4 Gb/s, and 8.1 Gb/s data rates supported
• Insertion loss < -3 dB @ 6.5 GHz mated plug and receptacle fixtures
• Return loss < -20dB @ 4.25 GHz mated plug and receptacle fixtures
• Differential Impedance 100 +/- 5 ohms
• Single Ended Impedance 50 +/- 2.5 ohms
建議您可同時參考以下相關產品目錄。